| Your application: Cleaning of CNC-finished parts |
|
|
|
|
|
Many components of the automotive and the mechanical engineering are manufactured by means of modern CNC processing methods. E.g. the processing of the function areas of cast parts or the production of complex components made of full material (e.g. Hydraulics blocks).
CNC-finished parts are in general suitable for the batch cleaning in special workpiece straps.
By the CNC-productional process the parts are polluted with cooling substances (KSS), mostly aqua based (emulsion). In addition there are pollutions with abrasion and chips. |
|
|
Advantage emulsion: According to the principle 'same solves same' emulsion soiled parts shoud be cleaned preferably with aqueous solutions.
Free of spots: With an integrated DI-water rinse the components can be dried free of spots
Easy drying:CNC-finished parts are in general optimally suitable for a fast and economical drying under vacuum. |
|
|
|
|
Compromise: If mainly oily parts shall be cleaned and emulsion only occasionally is typed in, solvent based plants can represent a compromise.
Presupposed the following restrictions do not disturb you:
Emulsion spots: Cleaning emulsion soiled parts with solvents (CHC / non-halogenated HC) always leaves more or less distinctive spots, particularly at the dried emulsion.
Restricted water input: Caused by the low system pressure a high water-/emulsion entry can cause malfunctions in plants for non-halogenated HC. |
|
|
|
Höckh Metall-Reinigungsanlagen GmbH - Untere Reute 58-66 - 75305 Neuenbürg (Germany)
Tel.: +49 (0)70 82 / 5 00 41 - Fax: +49 (0)70 82 / 5 06 27 - e-mail: info@hoeckh.com |
|
